AUTO REPAIRBUSINESS BROKERBook a call
Menu

Auto repair shop earnings builder

Build an annual shop earnings estimate from paid repair orders, average ticket, parts mix, parts margin, direct payroll and overhead. The calculator separates labor revenue from its staffing cost and shows how another set of monthly orders could change SDE. Check the result against your real financial statements before pricing a deal.

Cars arriving at reception, repair tickets on a counter and replacement parts on a workbench.
Your inputs

Your estimate

Annual sales
$900,000
Parts gross profit
$216,000
Labor gross profit
$248,000
Modeled SDE
$194,000
Low operating value
$329,800
High operating value
$632,440
SDE change with added cars
$24,480
Revised SDE
$218,480
  • Use amounts before sales tax. Include all non-owner operating expenses exactly once. Additional volume earns the displayed contribution only if staffing, parts and demand support it. A negative SDE cannot support a positive earnings-based value range.
Your results at a glance

Compare the outputs below using one common scale.

Calculated results for Shop earnings builderAnnual salesParts gross profitLabor gross profitModeled SDELow operating valueHigh operating value$0$900,000

Source: your worksheet inputs and the published methodology below. As of November 21, 2026.

Chart data and full results
Calculated outputs from the current inputs
Annual sales$900,000
Parts gross profit$216,000
Labor gross profit$248,000
Modeled SDE$194,000
Low operating value$329,800
High operating value$632,440
SDE change with added cars$24,480
Revised SDE$218,480
Assumptions and formulas

Annual revenue equals monthly paid repair orders × ARO × twelve. Multiply parts revenue by parts margin, then subtract loaded technician payroll from labor revenue. Deduct operating overhead excluding owner compensation. Price only positive modeled SDE at reported small-shop quartiles.

Default figures are illustrative. Replace them with figures for the same period and keep a copy of the supporting records.

This is an estimate, not an appraisal or valuation opinion.

Key takeaways

  • Use paid, closed repair orders and sales before tax for the same period.
  • Keep parts margin distinct from markup and loaded technician pay distinct from overhead.
  • Charge the extra labor and capacity you need to complete additional work.

How do you get a clean sales number?

Take the count of paid repair orders and the sales attached to those orders from the same reporting period. Use revenue before sales tax. If the shop system includes canceled tickets, internal rechecks or warranty work without a customer charge, decide how you will treat each category and write the filters down. The objective is to make car count multiplied by average repair order reconcile to recognized sales.

Start with a full year if your business has a seasonal tire rush or a fleet customer with irregular work. Divide annual volume by twelve to obtain a monthly starting point. Entering the busiest month and multiplying it by twelve assumes demand never eases. Use the SMS report checklist to preserve the source export and the filters a buyer needs to reproduce it.

How does sales mix flow through gross profit?

Split sales into parts and labor using actual category revenue. The calculator multiplies parts revenue by your parts gross margin and subtracts direct technician payroll from labor revenue. The sum gives gross profit before operating overhead. In a shop with a large sublet or tire-disposal category, reconcile those sales and associated costs before forcing them into the two-part model.

A month with high ARO can still carry a weak margin if several expensive components pass through at a low markup. Check whether vendor credits or core deposits distort the cost of goods line. Compare posted labor sales with billed hours and the effective rate actually collected. The guide to car count and ARO gives you the record fields to place beside the profit and loss statement.

What does a workable example show?

Illustrative composite — not a real client. A shop closes 100 paid orders per month with a $500 average ticket. Annual sales are 100 × $500 × 12 = $600,000. Half is parts revenue, and a 40% parts margin yields $120,000 of parts gross profit. Labor revenue is $300,000. After $150,000 of direct technician pay, labor contributes another $150,000. Annual overhead of $200,000 leaves $70,000 of modeled SDE.

Now add ten orders per month at the same ticket, mix and margin. The new revenue is $60,000. Of that, $30,000 comes from labor and $12,000 from parts gross profit. If incremental staffing and overhead cost $5,000 for the year, modeled earnings rise $37,000. A meaningful question for the buyer is whether the crew has enough time to do another 120 annual orders without needing an additional hire.

Which expenses should you check before applying a multiple?

Start with occupancy, nontechnical payroll, insurance, software, supplies and normalized management costs. Confirm that related-party rent matches the space a buyer can occupy. If you pay yourself for production through payroll, choose an earnings treatment consistent with the working buyer you are modeling. A replacement for a full-time lead technician can materially change the cash available after closing.

  1. Reconcile service revenue to the accounting records for the same period.
  2. Match technician payroll and benefits to the pay periods covered by that revenue.
  3. Include all operating overhead once and document owner-specific adjustments.
  4. Test incremental demand against the bay capacity calculation and payroll benchmark.

If you are selling, use the comparison to explain a change in earnings rather than simply pointing at higher gross sales. If you are buying, keep a base case you can verify without improvements and a separate growth case you will have to execute. The observed small-shop multiples applied by the tool are a screening range around positive earnings, with real estate and closing adjustments handled separately.

How can an apparent improvement disappear in diligence?

Match the order date with the revenue recognition date. A service writer can close a group of older tickets at month-end, lifting reported orders even though much of the work occurred earlier. Compare open work in process at the start and end of the period. Check whether fleet invoices and credit memos are being counted consistently. A sustained shift in ticket mix is more useful than a spike created by timing.

Review the denominator behind each department margin. Sales tax collected for the state belongs outside revenue. Warranty reimbursements, discounts and parts returns may be recorded in different places depending on the software. Trace a small sample from estimate through invoice, payment and ledger posting. If the average repair order report excludes discounts but the bank deposits reflect them, your earnings model will run high.

Finally, ask whether the next order resembles the average one. A fleet oil service may keep a technician busy at a lower ticket and margin. An advanced diagnostic job may raise the ticket but occupy your only specialist for a full shift. Price additional orders with a blend supported by your actual pipeline. Keep the high-volume case separate until you can identify the equipment, labor and customers needed to deliver it.

How can you rebuild a month of repair orders into a full-year estimate?

Consider a shop completing 120 paid repair orders a month at a $450 average ticket before sales tax. Enter forty percent of sales for parts and a fifty percent gross margin on those parts. The rest of sales is treated as labor. Enter $190,000 for annual direct labor payroll and $210,000 for annual overhead. Leave extra cars and extra labor at zero while you check the current operation. The calculator produces $648,000 in annual sales. Parts sales account for $259,200, and the parts gross profit is $129,600. Labor sales of $388,800 less $190,000 of payroll produce $198,800 of labor gross profit. After overhead, modeled SDE is $118,400.

Suppose the owner quotes a near-term opportunity to add eight paid orders each month at the same ticket and mix, with $22,000 of additional annual labor expense. Those orders add $43,200 of sales. Each sales dollar leaves eighty cents after parts cost under these assumptions, so incremental contribution before new labor is $34,560. Subtract the $22,000 and modeled SDE rises by $12,560, reaching $130,960. Check the daily schedule as well as the arithmetic. The new jobs could require capacity during the same two afternoons when the existing calendar is already full.

Why do gross margin, markup and parts share produce different answers?

Parts share says how much of each customer dollar comes from selling parts. Parts margin says what fraction of those parts sales remains after acquisition cost. If a shop sells a component for $150 after paying $100, it earns $50 gross profit. Its markup on cost is fifty percent, while its gross margin on sales is one third. Entering fifty percent as margin would credit that individual sale with $75 gross profit. You can avoid that mistake by pulling parts revenue and parts cost for the same period and dividing the difference by the revenue.

Review how your software treats core deposits, freight, warranty credits and shop supplies. An unrecovered core can sit temporarily in the parts account even though the shop expects a refund. A fleet discount may appear only in net revenue at the end of the month. Comparing gross invoices with net supplier cost can exaggerate the retained margin. Ask your bookkeeper to reproduce one ordinary order and one return, then compare the software totals to the general ledger. Document any adjustment you carried into the calculator.

How would a different service mix change the result?

Keep the current 120 orders and $450 ticket but increase the parts share to fifty percent while holding the parts margin, payroll and overhead steady. Parts gross profit rises to $162,000 because more sales are assigned to parts. Labor gross profit falls to $134,000 because fewer sales are assigned to labor. Modeled SDE falls from $118,400 to $86,000. This is a sensitivity exercise. A real mix shift could alter technician time, throughput or required inventory as well. Your next step is to compare actual repair categories, such as tire packages and diagnosis-heavy electrical work, with their respective labor requirements.

An average repair order can also rise when low-ticket customers stop returning. Check the underlying count of unique vehicles and the distribution of repair amounts. If one fleet transmission replacement raises a small month’s average, annualizing that ticket assumes an unusually expensive job repeats. Build a second run using a twelve-month weighted average. Add invoice revenue across the period and divide by all paid orders. An unweighted average of monthly tickets gives a tiny holiday month as much influence as a full summer schedule.

Which costs sit outside the growth calculation?

Additional labor belongs in the extra-labor field only when you have an incremental cash cost. If your existing technician can complete the work within current paid hours, the first few jobs may require little additional payroll. Once overtime, a second service writer or another technician becomes necessary, use the appropriate full-year cost. If more work also triggers another software license, additional insurance or a rented bay, rebuild the overhead assumption separately. The extra-car result does not silently fund those expenses.

Before valuing the higher SDE, obtain evidence of customer demand and the dates the work can begin. Ask for the signed fleet schedule, proposed rate card, historical cancellation pattern and payment terms. Then check parts purchasing and cash collection. A shop might report higher earnings while carrying more inventory and waiting longer for a commercial customer to pay. Showing both the earnings result and the working-capital commitment gives a prospective buyer a clearer picture of the opportunity.

What else should you know?

Does car count mean distinct customers or vehicles?

For this worksheet it means paid, closed repair orders in the period you use to calculate ARO. A vehicle that returns for separate paid work can appear again. If your software counts vehicles or visits differently, document the filter and use a matching revenue numerator.

Can I enter a parts markup as the gross margin?

Convert it first. Markup divides gross profit by cost, while gross margin divides the same profit by selling price. If a part costs $60 and sells for $100, gross profit is $40 and the gross margin is 40%. Enter forty in the margin field.

Where should I put service advisor payroll?

Put direct technician wages and the associated employment costs in direct payroll. Put service advisor compensation into overhead unless your books use another documented convention that you reconcile consistently. Count every wage, benefit and payroll tax once, including the cost of any work a buyer must still cover.

Can a buyer pay for the upside shown here?

A buyer can test extra volume, yet future demand and capacity still require proof. Review unfilled appointments, staffing, parts availability and contribution after any added costs. Compare sustained results from a real operating period with the modeled sensitivity before including the improvement in transferable earnings.

Which sources can you check?

Explore the valuation hub

Recommended for you

Talk through your next move.

Bring your shop, your offer, or the question holding up your decision.

Book an intro call