AUTO REPAIRBUSINESS BROKERBook a call
Menu

Shop buyer’s first 90 days plan

Use your first 90 days to keep repairs, payroll and cash collections moving while you learn how the shop runs under your ownership. This plan gives you a first-shift control check, a way to establish operating baselines and a second-stage process for choosing measurable changes without disrupting working routines.

Prepared by HedgeStone Business Advisors · Version 2026-11-21

Inside the shop buyer’s first 90 days plan
Day one through the first monthVerify cash custody · Review every open order · Meet each technician privately · Set a baseline
Days 31 through 90Watch working capital · Test one operating change · Review retention signals · Set the next quarter’s priorities
Use this checklist here

Day one through the first month

Days 31 through 90

Key takeaways

  • Verify the first deposit against its batch before relying on sales totals.
  • Assign each inherited repair order, deposit and warranty promise.
  • Measure one operating change against a documented baseline.

What needs your attention on the first shift?

Establish who can authorize work, access funds, release vehicles and respond to a customer whose repair crosses the closing date. Your team needs clear decisions at the counter before it needs a new strategy.

Walk open tickets with the service writer before the phones get busy. For each vehicle, record the approved scope, work already performed, parts ordered, customer deposit, balance due and promised delivery. Identify whether the buyer or seller owns the remaining economics under your agreement. Keep a designated contact for the customer so an accounting dispute does not leave a driver without an update.

Confirm your own access to the merchant processor, bank deposit reporting, payroll provider, insurance, phones and shop management software. Test the first sale, refund workflow and end-of-day close within the ordinary course of business. Track the amount and settlement date of the first card batch. A successful card authorization does not establish that proceeds reached the buyer’s account.

Which operating checks belong in the first month?

The first section, Day one through the first month, gives you these prompts and room to document your evidence.

  1. Verify cash custody. Test your merchant settlement, bank permissions, cash drawer and daily close. Match the first deposit to the batch total.
  2. Review every open order. Assign a service writer to contact waiting customers. Reconcile deposits, backordered parts, promised dates and warranty work with the closing schedule.
  3. Meet each technician privately. Confirm schedule, pay basis, toolbox ownership, specialties and current bottlenecks. Record commitments and follow up after the first payroll.
  4. Set a baseline. Save closed tickets, ARO, billed hours, comeback hours and cash balance each week. Document filters so the next month remains comparable.
Shop buyer’s first 90 days plan preview
SectionTopics covered
Day one through the first monthVerify cash custody · Review every open order · Meet each technician privately · Set a baseline
Days 31 through 90Watch working capital · Test one operating change · Review retention signals · Set the next quarter’s priorities

What do you measure before changing operations?

Create a baseline from repeatable reports and listen to the team that produced it. Estimate a normal week from comparable working days and mark unusual jobs, staffing gaps and fleet cycles that affect the comparison.

Meet technicians and service writers individually. Ask which job routinely waits for a part, which customer needs a purchase order and which diagnostic decision used to go to the seller. Confirm each employee understands the pay schedule and who may approve overtime or parts exceptions. Ask your payroll professional to check setup before the first pay run.

Monitor available cash alongside your booked sales. A profitable fleet repair completed this week may become cash much later, while payroll and parts invoices have specific due dates. Create a weekly cash forecast with starting cash, expected collections, vendor commitments, payroll, taxes, debt service and an ending balance. Update it when a customer moves a payment date or an equipment failure changes spending.

How can a sales gain leave cash tight?

Illustrative composite — not a real client.

Suppose your shop begins a week with $28,000 cash. You expect $19,000 of collections and owe $13,500 in payroll, $8,500 to parts vendors and $4,000 in scheduled debt service. Projected ending cash is $21,000. If a $7,000 fleet receipt moves to the following week, the balance falls to $14,000 even when the repair sales still appear on your operating report. Revisit upcoming withdrawals and collection timing before committing to an unplanned equipment purchase.

How do you verify the first day’s deposits and inherited repair orders?

Before the first shift, identify who can see the merchant batch, bank activity, shop receipts and open-order list. Record a named person under Owner for each reconciliation and a time under Due for the first check. If a payment arrives for an invoice issued by the seller, follow the collection arrangement in the closing documents. Keep the deposit trace and record who is entitled to it. Ask the seller’s designated contact how a misdirected payment will be handled so the front-counter team can give a customer a clear answer without making a new promise.

Walk the open-order report against the vehicles, keys and authorizations actually present. A car parked outside awaiting parts may have a deposit, a customer-supplied item or a diagnostic charge owed to the former entity. Read the repair history, check the parts commitment and agree who calls the customer with the next update. Under Evidence or next action, use the internal repair order identifier and one verifiable next step. Keep the customer’s identity and contact details in the shop system. The service manager should be able to pick up the list on the next shift and tell which vehicles can safely move forward.

How can you turn a fleet billing delay into an operating test?

Illustrative composite — not a real client. Your new advisor closes four municipal fleet tickets totaling $6,400 and sends ordinary emailed invoices. The fleet office requires a purchase order reference and individual vehicle identifiers on its portal. The service work is finished, but the invoices miss the customer’s approval run. Ask the advisor to confirm the required fields with the authorized fleet contact and resubmit under the correct billing arrangement. Record the actual acceptance date and expected receipt in your cash forecast. Closing the tickets again can duplicate sales and will not supply the missing approvals.

At the end of the month, review the next group of fleet jobs from appointment through remittance. Check that the advisor obtained the authorization before work, the technician recorded the unit identifier, and the invoice attachment can be reconciled to the accepted amount. Compare the number of rejected submissions before and after this change. If a second customer uses different requirements, keep the instructions attached to the correct account. This small test can deliver evidence about cash timing without introducing a new billing procedure on every retail job in your first month.

How should you use the private technician meetings?

Ask each technician to describe one job the shop handles particularly well and one recurring delay. Take notes about the job or missing resource, the resulting effect on the customer, and who else can verify the issue. If a technician is the only person who handles a particular certification-dependent service, confirm the documentation through the appropriate internal process. Do not promise a compensation change or new equipment purchase during the first conversation. Identify the manager responsible for follow-up and give the technician a date when they can expect an answer.

Compare those conversations with what you see in dispatch. A specialist may spend mornings waiting for authorization while a second technician has accepted jobs but cannot find lift time. Look at the schedule for a representative week and time one suspect handoff. Talk to the advisor about how estimate approvals enter the work queue. Capture your initial observations before changing the dispatch rule. Once you have a baseline, a change to who checks a queue at noon is easier to test than a complete reorganization of bays, pay plans and customer communication.

What evidence should move from the first month into the next quarter?

Choose a small set of measures with named owners and comparable reporting periods. For cash, identify the oldest collectible fleet balance, next payroll and amount available after committed supplier payments. For customer work, record the number of overdue promises, reopened orders and vehicles awaiting authorization. For staffing, track coverage of hard-to-fill functions and outstanding commitments from your first meetings. Give the owner a place to explain an unusual holiday week, training event or long parts delay. A run of comparable weeks is more informative than a single favorable Friday.

At the day-60 review, continue the operating change only if the measures and the people doing the work support it. At day 90, turn unresolved items into dated next-quarter assignments. Put one person in charge of each item and ask for the actual record that will show completion. Save a short account of which changes you tested, what happened and which original assumptions you revised. Your next operating meeting can then start with actual customer promises, cash dates and staffing commitments instead of a new owner’s recollection of a hectic first week.

How do you choose and verify the next sixty days of work?

Assign a person and review date to each cash, customer or staffing issue you intend to carry into the next quarter.

  1. Watch working capital. Build a weekly cash forecast from fleet receipts, payroll, vendor terms, sales tax and debt service. Update it when a large fleet account pays late.
  2. Test one operating change. Choose one constraint such as parts waiting time. Name a lead, set a test period and compare results with the baseline.
  3. Review retention signals. Check repeat appointments, lost fleet work and technician overtime. Ask the service desk what customers notice before changing pricing.
  4. Set the next quarter’s priorities. List the three cash or capacity constraints with the largest verified impact. Assign an owner, due date and evidence for each.

How do you choose the first operating improvement?

Pick a recurring problem you can measure, assign one person to the change and set a review date. Avoid changing dispatch, labor pricing and pay plans simultaneously because you lose the ability to tell which action affected the outcome.

Try the bay utilization calculator if your schedule is full while vehicles wait for equipment or technicians. Use the ownership transition plan if a test keeps returning to the seller for approvals. A capacity problem may involve parts availability, authorizations or diagnostic coverage even when additional bays are physically available.

At the quarterly review, compare actual payroll, working capital and job throughput with your acquisition assumptions. Write down the two or three gaps with the clearest evidence and assign a decision-maker to each. Preserve the original baseline so a later improvement can be traced to a real operational change.

What else should you know?

Should I raise prices as soon as I take over?

First verify the current effective labor rate, discount practices, job mix, written customer commitments and local operating costs. A change may be justified, but you need a baseline and a communication plan. Choose a defined service or process to test and review results before making wider adjustments.

Who handles warranty work from before closing?

Consult the purchase agreement and confirm how the parties agreed to cover outstanding warranty obligations. Assign someone to take the customer’s call, document the original repair and identify the responsible payer. Keep customer communication moving while the buyer and seller resolve any disputed allocation through the agreed process.

How do I know whether the transition is on track?

Check whether payroll and deposits reconcile, open orders have owners, critical vendor accounts work and your team can make decisions without unexpected seller involvement. Compare the latest week with your baseline and record causes of exceptions. A busy front counter alone cannot confirm that controls are working.

Should I retain a quarterly plan after day 90?

Keep the measures that help you make a real decision, such as upcoming cash needs, repeat repair work or persistent parts delays. Assign an owner and review date for each priority. Archive the original plan with your baseline so later changes can be compared against a documented starting point.

Which sources can you check?

Explore the operations hub

Recommended for you

Talk through your next move.

Bring your shop, your offer, or the question holding up your decision.

Book an intro call